Model No: IRS70-2CI

Auto backwash, 70Lpm, 50mm connection

Puretec IRS70-2CI, Auto backwash, 70Lpm, 50mm connection
Puretec IRS70-2CI is designed to prevent the staining and rust build up in your water system. The system reduces the level of iron and manganese, through increasing the rate of oxidization of dissolved iron and then physically filtering the iron using the deep filter bed. After hardness, iron is the most common water contaminant causing staining, thick sediment, slime and smell. It blocks up pumps, taps, filters and ruins the look of anything it comes in contact with.

IRON - The most common source of orange and brown staining.
After hardness, iron is the most common water contaminant causing staining, thick sediment, slime and smell. It blocks up pumps, taps, filters and ruins the look of anything it comes in contact with. Iron at high levels will cost you money. For water that contains bacterial iron, pre-treatment is required, please contact our water treatment team for free consultation.

Find a Puretec Dealer

Features & Benefits

• The system reduces the level of iron and manganese, through increasing the rate of oxidization of dissolved iron and then physically filtering the iron using the deep filter bed.
• Prevent the staining and rust build up in your water system.
• Automatic backwash – set and forget.
• Stores system configuration and operation data in non-volatile memory.
• Up to 2” connections for minimum pressure loss.
• Weather resistant cover for controller.
• Weatherproof transformer.
• Flexible programming options.
• Volume-based backwash options available for up to 450,000 litres/day from a single unit.

Specifications

Ordering Code
IRS70-2CI
Valve
Automatic 2CI
pH Range
6.8 - 9
Flow Rate
70 Lpm
Maximum Flow Rate
120 Lpm
Connection
2” Male BSPT, 1” Drain
Min/Max Pressure
200 - 690 kPa
Operating Temperature
5 - 40°C (41 - 104°F)
Power Supply
230V AC / 50 Hz
Warranty
1 year^
Replacement Media Kits
RMK-IRS70
Accessories
WTV5092 - Differential pressure switch for load based backwashing.
WTV7500 - Alternating valve for 2 system / clean water to backwash.
WTV7550 - No Bypass valve to isolate the system during regeneration.
WTV7210 - Flow meter for volume based backwash.
WTV7400 - Microswitch kit for 2CI models.
Operating Conditions: 1. Dissolved Oxygen Content Minimum 15% of the Iron. 2. Staining threshold is 0.2 to 0.3ppm.^Warranty is 1 year parts and labour where applicable, subject to approval.